Mild Steel High Efficiency Electrodes - Low Hydrogen - Stainless Steel - Hard Facing - Cast Iron Electrodes - Tungsten Electrodes -Low Heat Input - Cutting & Gouging - CO2 MIG Wire - CO2 MIG Wire - SS Tig Wire - SAW Wires - Aluminum Welding Wire - Flux Cored Wire - India

 

Hard facing Electrodes - Hard Weld India

Electrodes

Hard facing Electrodes - Hard Weld 250

Hard Facing Electrodes

Hard facing Electrodes - Hard Weld Nashik

Hard weld 250

 

Hard Facing Electrodes - Hard weld 250

Characteristics :
A medium heavy coated, rutile type, hardfacing electrode. Weld deposit is air hardening type and can withstand heavy impact load. It gives machinable weld deposit of approx. 250 BHN hardness. To be used with buffer layer of Premier-7016 on hard base material. Recommended for hardfacing on Mild Steel, Carbon steel & Low Alloy Steels.

Applications :
The weld metal is hard, tough and easily machinable. It is used for Repair and Filling up worn out machine parts, Gear Teeth, Shaft Couplings, Mill Guide Plates, Pulleys, Axles, clutches, Sugar Cane Crushers, Rail Ends and Crossing etc.

Typical Weldmetal Composition

 Element

Percent

C 0.20-0.30
Mn 0.25-0.60
Si 0.15-0.25
Cr 0.50-1.00

Current Range & Packing Data :


Size MM DxL

Current Range (Amps) AC or DC (-)

Pieces per Packet

Pieces per Carton

5.00x450 170-210 65 260
4.00x450 130-160 95 380
3.15x450 90-110 150 600

Hardness :
240-280 BHN approximately on 3 layer deposit.

HOME | WELDING ELECTRODES | TUNGSTENALUMINUMCO2 MIG WIRE  | SS TIG WIRE  |  FLUX CORED WIRE  |  SAW WIRE  |  AWS STANDARDS | ENQUIRY  | CONTACT US

 

Welding Electrodes & Wire Nashik, India

 

Copyright 2013. All rights reserved. All data is provided for informational purposes only.
Site Developed & Maintained By: C-Tech Solutions

site stats