Mild Steel High Efficiency Electrodes - Low Hydrogen - Stainless Steel - Hard Facing - Cast Iron Electrodes - Tungsten Electrodes -Low Heat Input - Cutting & Gouging - CO2 MIG Wire - CO2 MIG Wire - SS Tig Wire - SAW Wires - Aluminum Welding Wire - Flux Cored Wire - India

 

Hard facing Welding Electrodes

Electrodes

Hard facing Welding Electrodes - Hard Weld 350(LH) India

Hard Facing Electrodes

Hard facing Welding Electrodes - Hard Weld 350(LH)

Hard weld 350(LH)

 

Hard Facing Electrodes - Hard weld 350(LH)

Characteristics :
A medium heavy coated, basic type, hydrogen controlled electrode for hardfacing applications on mild steel, carbon steel and low alloy steels where hardness requirement is approximately 300 BHN. The weldmetal is machineable with carbide tools.

Applications :
Hot & cold punching dies, Shear blades, Brake shoes, rail ends & crossings, Conveyor parts, Steel castings, Pulleys and Axles etc.

Typical Weldmetal Composition

 Element

Percent

C 0.20-0.30
Mn 0.25-0.50
Si 0.50-0.75
Cr 0.85-1.25

Current Range & Packing Data :


Size MM DxL

Current Range (Amps) AC(70V) or DC (+)

Pieces per Packet

Pieces per Carton

5.00x450 180-240 45 180
4.00x450 140-180 80 320
3.15x450 100-140 110 440

Hardness :
300-350 BHN approximately on 3 layer deposit.

HOME | WELDING ELECTRODES | TUNGSTENALUMINUMCO2 MIG WIRE  | SS TIG WIRE  |  FLUX CORED WIRE  |  SAW WIRE  |  AWS STANDARDS | ENQUIRY  | CONTACT US

 

Welding Electrodes & Wire Nashik, India

 

Copyright 2013. All rights reserved. All data is provided for informational purposes only.
Site Developed & Maintained By: C-Tech Solutions

site stats