Mild Steel High Efficiency Electrodes - Low Hydrogen - Stainless Steel - Hard Facing - Cast Iron Electrodes - Tungsten Electrodes -Low Heat Input - Cutting & Gouging - CO2 MIG Wire - CO2 MIG Wire - SS Tig Wire - SAW Wires - Aluminum Welding Wire - Flux Cored Wire - India

 

Hard facing Welding Electrodes - Hard Weld 350

Electrodes

Nashik Hard facing Welding Electrodes - Hard Weld 350

Hard Facing Electrodes

Hard Weld 350(LH)

Hard weld 350

 

Hard Facing Electrodes - Hard weld 350

Characteristics :
A medium heavy coated, rutile base, air hardening type electrode for hardfacing on mild steel, carbon steel & low alloy steel. Weld deposit is machinable, resistant to moderate abrasion & heavy impact and has hardness of 350 BHN. On hard base material give buffer layer of Premier-7016.

Applications :
Brake shoes, Shafts, Axles, Conveyor parts, Cams, Wobbler ends, Elevator buckets, Pulleys, shear blades, Cold punching dies etc.

Typical Weldmetal Composition

 Element

Percent

C 0.20-0.30
Mn 0.25-0.60
Si 0.15-0.25
Cr 0.75-1.50

Current Range & Packing Data :


Size MM DxL

Current Range (Amps) AC or DC (-)

Pieces per Packet

Pieces per Carton

5.00x450 170-230 65 260
4.00x450 130-170 95 380
3.15x450 100-130 150 600

Hardness :
340-380 BHN approximately on 3 layer deposit.

HOME | WELDING ELECTRODES | TUNGSTENALUMINUMCO2 MIG WIRE  | SS TIG WIRE  |  FLUX CORED WIRE  |  SAW WIRE  |  AWS STANDARDS | ENQUIRY  | CONTACT US

 

Welding Electrodes & Wire Nashik, India

 

Copyright 2013. All rights reserved. All data is provided for informational purposes only.
Site Developed & Maintained By: C-Tech Solutions

site stats