Mild Steel High Efficiency Electrodes - Low Hydrogen - Stainless Steel - Hard Facing - Cast Iron Electrodes - Tungsten Electrodes -Low Heat Input - Cutting & Gouging - CO2 MIG Wire - CO2 MIG Wire - SS Tig Wire - SAW Wires - Aluminum Welding Wire - Flux Cored Wire - India

 

Hard facing Welding Electrodes - Hard Weld V 5

Electrodes

India Hard facing Welding Electrodes - Hard Weld V 5

Hard Facing Electrodes

Nashik Hard facing Welding Electrodes - Hard Weld V 5

Hard weld-V

 

Hard Facing Electrodes - Hard weld- V

Characteristics :
A medium heavy coated, rutile base, air hardening type hardfacing electrode. Gives weld deposit of 500 BHN. Weld is non-machinable but can be ground. It is resistant to severe abrasion & moderate impact. Two or three layer deposits are recommended as the first layer may not develop the full hardness due to dilution. Recommended for Mild Steel, structural steel & cast steels.

Applications :
Reinforcing worn rails, Crane wheels, Wornout parts of Earth moving equipments, Bamboo chipper knives, Sprockets, Shears & Croppers, Muller tyres, Ploughshares, Drill bits, Mine rails, Oil expellers, Caterpillar threads etc.

Typical Weldmetal Composition

 Element

Percent

C 0.50-0.75
Mn 0.60-1.00
Si 0.50-0.75
Cr 3.0-4.0

Current Range & Packing Data :


Size MM DxL

Current Range (Amps) AC or DC (-)

Pieces per Packet

Pieces per Carton

5.00x450 160-200 65 260
4.00x450 120-160 80 320
3.15x450 90-120 150 600

Hardness :
480-530 BHN approximately on 3 layer deposit.

HOME | WELDING ELECTRODES | TUNGSTENALUMINUMCO2 MIG WIRE  | SS TIG WIRE  |  FLUX CORED WIRE  |  SAW WIRE  |  AWS STANDARDS | ENQUIRY  | CONTACT US

 

Welding Electrodes & Wire Nashik, India

 

Copyright 2013. All rights reserved. All data is provided for informational purposes only.
Site Developed & Maintained By: C-Tech Solutions

site stats