Mild Steel High Efficiency Electrodes - Low Hydrogen - Stainless Steel - Hard Facing - Cast Iron Electrodes - Tungsten Electrodes -Low Heat Input - Cutting & Gouging - CO2 MIG Wire - CO2 MIG Wire - SS Tig Wire - SAW Wires - Aluminum Welding Wire - Flux Cored Wire - India

 

High Tensile Steel Electrodes - Premier NMC

Electrodes

High Tensile Steel Electrodes-Premier NMC India

High Tensile Steel Electrodes

Nashik High Tensile Steel Electrodes- Premier NMC

Premier NMC

 

High Tensile Steel Electrodes - Premier NMC

Characteristics :
A basic coated all position radiographic quality electrode with 1% Cr, 2.5% Ni. 0.7% , Mo.

Applications :
The electrode has very high tensile strength and is suitable for welding of Ni-Cr-Mo steels, steam turbine rotors & earthmoving equipment etc.

Typical Weldmetal Composition

 Element

Percent

C 0.05
Si 0.4
Mn 1.6
S 0.025
Ni 0.8
Cr 0.2
Mo 0.3

Typical Mechanical Properties of all weld Metal

Ultimate Tensile Strength Kg/mm2

Yield Strength Kg/mm2

Elongation % (L=5d)

CVN Impact Strength at +200C.Kgm

72 63 23 16

Classifications :

AWS A5.1 :

E 10016 G

Current Range & Packing Data :


Size MM DxL

Current Range (Amps) AC or DC (+)

Pieces per Packet

Pieces per Carton

6.30x450 250-330 30 120
5.00x450 200-240 45 180
4.00x450 140-190 80 320
3.15x450 100-140 110 440
2.50x350 60-90 160 640

Instructions:
  • Keep electrodes dry.
  • Use good fit-up on joints.
  • Do not use excessive current.
  • Adopt proper sequence.
  • Hold short arc.
  • Remove the slag with a stainless steel wire brush.

HOME | WELDING ELECTRODES | TUNGSTENALUMINUMCO2 MIG WIRE  | SS TIG WIRE  |  FLUX CORED WIRE  |  SAW WIRE  |  AWS STANDARDS | ENQUIRY  | CONTACT US

 

Welding Electrodes & Wire Nashik, India

 

Copyright 2013. All rights reserved. All data is provided for informational purposes only.
Site Developed & Maintained By: C-Tech Solutions

site stats